Buy NEW Replica Bell and Ross watch

Buy Bell & Ross BR-X1 CARBONE FORGE BRX1-CE-CF-BLACK Replica watch

BR V3-94 RS20

B&R instruments are round. Its big box is made of steel. It is equipped with a two-way rotating bezel with a 60-minute scale, allowing you to measure short time.

On the dial
The 12-digit number on the dial of a sports watch. The font used Renault DP World F1 Team font. The minute track is divided into small black and white squares, like a chess board, which symbolizes the finish line of the car. The yellow hands show the various functions of the timer.

The bottom of the model is engraved: “Formula 1 Renault DP World RS20”.

Movement: BR-CAL.301 movement. Automatic machinery.
Crystal: curved sapphire crystal with anti-reflective treatment.
Functions: hours, minutes, three o’clock and date. Chronograph: Timed at 9:30, central chronograph stopwatch. The enhancement on the tachymeter scale.
Water resistance: 100 meters.
Case: 43 mm in diameter. Polished and satin-finished steel.
Two-way rotating steel bezel with black anodized aluminum ring and countdown timer. Screw-in crown. Sapphire back cover.
Strap: black/yellow calfskin, carbon effect or polished and satin-finished steel.
Dial: matte black. The application numbers are stuffed with Superluminova. Metal hour and minute hands are hollowed out and filled with Superluminova.
Buckle: foldable. Polished and satin-finished steel.

BR 03-94 RS20

This is the iconic square watch of the brand. This chronograph is limited to 999 pieces and comes with an ultra-abrasive sand black ceramic case.

All information about the timer function is shown in yellow. The enhanced function is used as a speedometer, divided into two different colored areas. The chronograph minute hand is located around the rhodium-plated brass ring, all of which helps to maximize readability.

Movement: BR-CAL.301 movement. Automatic machinery. Crystal: Sapphire crystal with anti-reflective treatment.
Functions: hours, minutes, three o’clock and date. Chronograph: 30-minute timer at 9 o’clock, central chronograph stopwatch. The enhancement on the tachymeter scale.
Water resistance: 100 meters.
Case: 42mm wide. Matte black ceramic. Strap: Perforated black rubber and black super synthetic fabric.
Dial: matte black. The application numbers are stuffed with Superluminova. Metal hour and minute hands are hollowed out and filled with Superluminova.
Buckle: ardillon. Microporous black steel.

BR-x1 RS20

It has the iconic box of the brand: the circle inside the square.

This is a particularly complex experimental version of BR 03-94.

The case is made of a variety of materials: PVD-treated titanium, ceramic and rubber. These materials can be used in sports watchmaking, aviation and Formula One.

The buttons of two materials evoke the shift paddles on the steering wheel. PVD treated steel ring around the frame. The skeletonized dial reveals a very complicated skeletonized mechanism and its gears.

Movement: BR-CAL.313 movement. Automatic machinery. X-shaped upper bridge. 56 jewels, 28,800 alt/h. Skeleton chronograph.
Crystal: Sapphire, anti-reflective treatment.
Functions: hours, minutes and small seconds at 3 o’clock. The date of the skeleton is 6 o’clock.
Chronograph: 9:30 minutes, located in the central second hand position. The enhancement on the tachymeter scale.
Water resistance: 100 meters.
Case: 45mm wide. Satin-finished titanium alloy and ceramic, rubber liner. Two-way rotating PVD frame with time stamp. Rocker buttons. The back of the bottom cover has a colored sapphire crystal opening, which is in the center position relative to the adjusting balance wheel.
Strap: black rubber perforated.
Spherical: skeletonized. The application numbers are stuffed with Superluminova. Metal hour and minute hands,
Hollow out and full of Superluminova.
Buckle: ardillon. The stainless steel crown is made of black rubber.

BR-x1 Tourbillon RS20

The high-end watches of this series are exquisite and delicate miracles.

The case is made of titanium, which is a light-resistant and lightweight material used in Formula 1. High-density rubber inserts protected by ceramic components improve operability. There is a minute hand on the fixed bezel and a “stop-start” indication on the rotating ring.

The large-diameter movement is regulated by a flying tourbillon with variable inertial balance. The manual winding barrel spring provides 100 hours of power reserve (pointer).

The clearly visible timing function on the side of the dial is controlled by a button that operates the column wheel, and the 30-minute counter is instantaneous.

Movement: BR-CAL.283 movement. Manually wind the flying tourbillon. Column wheel single button chronograph. 282 components, 35 jewels, 21,600 alt/h.
Power reserve of 4 days.
Crystal: Sapphire, anti-reflective treatment.
Functions: hours and minutes. Chronograph: The 30-minute counter at 11 o’clock and the 60-second counter at 1 o’clock pulse instantly. Indicates a power reserve of 9 o’clock.
Flying tourbillon at 6 o’clock.
Water resistance: 100 meters.
Case: 45mm wide. Satin-finished titanium alloy and matte ceramics, rubber liner. Two-way rotating PVD frame with time stamp. Tilt a single button. The sapphire caseback is treated with anti-reflective treatment.
Strap: black rubber perforated.
Spherical: skeletonized. Superluminova fill, metal and application index. Metal hour and minute hands are hollowed out and filled with Superluminova.
Buckle: ardillon. The stainless steel crown is made of black rubber.

This series has brought great improvements to the design. The simplest lines that make up its watch are crucial. In the end, these musical instrument sports watches realized an elegant basic form.